Compare!
Added-Value Products
Saves
Space, Time, Money, Frustration.
|
1)
NORTHERN ONTARIO RED PINE (N.O.R.P.) @ 2.4
lbs per sf. is ~ four times (4X) harder and durable than any White
Pine.
|
Northern Ontario Red Pine
(Natural FloodCoat Finish.)

PineFlooring.ca
uses N.O.R.P. exclusively
because of it has hardness, durability and
a rhythmic grain
|
Eastern Ontario WHITE Pine
(Natural BrushCoat Finish.)

PineFlooring.ca
does not
use any White or Yellow Pine(s)
because they lack hardness,
durability and a rhythmic grain
|
|
Northern Ontario
WIDEPLANK RED
PINE
 |
Northern Ontario
WIDEPLANK RED
PINE
 |
2)
Marreed-Prestman
PineFlooring.ca
obtains its RED PINE through "The Sustainable Forest Management
Network",
3) My proprietary GripTightTM
Fastening Technique is ~ four times (4X) tighter, stronger and
secure than "Blind Nailing",
4) Aluminium-Oxide Cured Topcoat Resin is ~ two times
(2X) more durable than Epoxy Resin Finishes,
5) Pineflooring.ca applies
two (2X) "Diamond-Tough" Pour-Down Floodcoat Topcoats,
6) Handcrafted and Artistically 'Distressed' wideplank RED PINE flooring is
"Kid-and-Dog Friendly.
".
7)
Marreed-Prestman PineFlooring.ca uses
EXPORT QUALITY KNOTTY NORTHERN ONTARIO WIDEPLANK RED PINE FLOORING
equal to the high European Export
Grade! I do not use common Retail Grades!
Whether you choose "MERCHANT", "SELECT" or "PREMIUM" ...
my wideplank wood is all the same superior quality lumber from the same
"State-of-the-Art" International Canadian Mill! The differentiation in the
price of my grades are a reflection in the level of labour-intensive
Value-Added (V/A) Services
offered at each Level.
In
addition to V/A Features, compare these grades:
 |
EXPORT QUALITY KNOTTY NORTHERN ONTARIO WIDEPLANK RED PINE FLOORING
|
 |
Boards are checked for Line Straightness beyond "Export Grade"
Professional Standards.
|
 |
Butt-Ends are not Pre-Cut
"SQUARED" (as per Standard Retail Outlets).
|
 |
Potential waste is
not cut-away. (as per Standard Retail
Outlets).
|
(If you do
not have a crew waiting for the next
board to be selected, potential waste cut-away and butt-ends squared, then,
MERCHANT (RETAIL PLUS) GRADE is Best for you!)
 |
EXPORT QUALITY KNOTTY NORTHERN ONTARIO WIDEPLANK RED PINE FLOORING
|
 |
Boards are checked for Line
Straightness beyond "Export Grade" Professional Standards.
|
 |
Butt-Ends are Pre-Cut
"SQUARED". (a labour-intensive cost-saving service).
|
 |
Potential waste is
not cut-away. (as per Standard Retail
Outlets).
|
(Whether you do or do not have a crew waiting for the next board to be selected
and potential waste cut-away, then, SELECT GRADE is Best for you!)
 |
EXPORT QUALITY KNOTTY NORTHERN ONTARIO WIDEPLANK RED PINE FLOORING
|
 |
Boards are checked
for Line Straightness beyond "Export Grade" Professional Standards.
|
 |
Butt-Ends are Pre-Cut
"SQUARED". (a labour-intensive cost-saving service).
|
 |
Potential waste is cut-away.
(a labour-intensive cost-saving service).
|
(If you have a crew waiting for "the next board" to be ready to install in
minimal time ... PREMIUM GRADE is Best for you!)
|
Compare Pineflooring.ca ...
CHECK THIS OUT.
"The Best of The
Best"
Only at Pineflooring.ca
"Marreed-Prestman
PineFlooring.ca specializes
in Value-Added Products
that will save you,
Space, Time, Money and Frustration."
Cutting &
Fitting Waste is Minimal.
DO-IT-YOURSELF features
New 12", 10", 8", 6", 4" Wide Plank,
Premium Knotty, NORTHERN ONTARIO RED PINE,
Kiln Dried, Tongue & Groove (T&G), Dressed-2-Sides
plus,
it is available
at Value-Added and Mill-Direct price levels.
"Exclusive Added-Value"
Save indoor space, save installation time, save money.
Prime Shelf-Life, 'pliable' via JUT* Service,
12", 10", 8", 6"
4" RED Pine,
Single 'Job-Lot' per SELECT ORDER,
Precision Widths,
Kiln-Dried ~ 810%,
Anti-Cup Grooves in all but 4" widths,
Center-Matched T&G,
"Kid-and-Dog Friendly." 'Distressing' or, Not,
Controlled Indoor Storage,
Hand Selected,
Graded for Knott Size and Solidity,
Pre-Fit for 'Line' Straightness, T&G Tightness,
Minimal Cutting/Fitting surplus,
Pre-Cut Squared-to-Random Lengths,
Hand Load/Unload inside building (with local helpers),
Nominal Charge Delivery anywhere
in Southern, Central and Eastern Ontario.
*Wood Flooring must be
pliable to accommodate installation.
Just-in-Time Processing and Delivery Service offers proper
Kiln-Pitch.
HAND-SELECTED, PRE-CUT & BUTT-ENDS
'SQUARED'.
My
Value-Added Red Pine lumber is
carefully milled, kiln dried and graded
then, it is again hand-selected, waste cut out and Butt-Ends
'Squared'. An Value-Added process that saves you space, time and money.
Controlled indoor storage.
NO ACCLIMATIZATION PERIOD* REQUIRED
Install immediately.
* NO acclimatization period is
required under normal (above +10 degree Celsius) delivery and proper installation conditions
... NO
ten (10) to (14) fourteen day
'Waiting
Period' to 're-condition' the wood because I control final
product processing "beginning-to-end", without 'abusive handling or
storage' delays ...
NO two week waiting period...
no 'tripping' over lumber or restraining ongoing work.
*
Applies to JUT Mill Readiness and 'local' hand-delivery in above
Zero Degree temperatures.
Extended distances and/ or Winter delivery
conditions and/or commercial transportation
may
affect Kiln-Pitch
to a slight extent requiring minimal three (3) day room-temperature acclimation.
DRESSED
SIZES
12" X 1" = 11-1/8 X 3/4"
10" X 1" = 9-1/4" X 3/4"
8" X 1" = 7-1/4" X 3/4"
6" X 1" = 5-1/4" X 3/4"
4" X 1" = 3-1/4" X 3/4"
|
...
to Commodity-Oriented 'Resellers'
Lumber for flooring is just another
commodity
requiring no special care or preparation.
Cutting &
Fitting Waste is High.
WHITE or YELLOW or EASTERN (NB) RED
Commodity-Oriented
'Resellers'
Waste
indoor space, installation time and, money.
No Prime Shelf-Life or 'pliability' via JUT Service,
No "Red" but, perhaps, White Pine,
Random 'Job-Lots' per COMMON ORDER, Varying Widths,
Usually, Air
Dried ~ 12-14%,
No Anti-Cup Grooves in any width,
Perhaps, Center-Matched,
No Artistically 'Distressed' Wood,
No
Controlled Indoor Storage,
Not
Hand Selected,
Not
Graded for Knott Size and Solidity,
Not
'Pre-Fitted' for 'Line
Straightness, T&G Tightness,
High
Cutting/Fitting waste ~10-15%,
Not
Pre-Squared-to-Random Lengths,
Not
Hand Loaded/Unload inside building (with local helpers), Bulk Drop,
Usually, a costly Delivery Charge and an immediate Delivery Area.
Commodity-Oriented
'Resellers'
ACCLIMATIZATION PERIOD REQUIRED
Install after ten (10) to fourteen (14) days.
"Due
to bulk handling and careless storage conditions ...
Commodity-Oriented Resellers require that you acclimate
their lumber to the moisture level within
your home or cottage for
10-14 days in controlled conditions before you can even begin to install it ...
Often, Resellers store flooring lumber outdoors (with or without cover)
or in a garage, shed or other unheated building ... the lumber
loses all of the benefits of being Kiln-Dried in the first place ... especially when stored under
tin roofs or covered with plywood or plastic.
Commodity-Oriented 'Resellers" usually offer only
6"
(common)
but, they may special order wider
widths at much higher cost. |
Perfect for the DIY: Do-it-Yourselfer *
Commodity-Oriented Resellers require an Acclimatization Period
for their wideplank wood flooring lumber within the building in which the
flooring is to be installed which places you in an 'impassable'
position ... 'tripping over your own lumber' and inhibiting most indoor
construction for ten (10) to fourteen (14) days before
installation of your wideplank floor can
begin. Whereby, Marreed-Prestman maintains proper
Kiln-Pitch * using controlled indoor storage
and Just-in-Time (JUT) Delivery ... No Acclimatization Period is required
for 'local' hand-delivered product whether you chose Full Installation or DIY:
Do-it-Yourself Lumber Supply.
PineFlooring.ca deals only with "The-Best-of-the-Best" in
Suppliers.
|
|

Modern Kilns |

Automated Mills |

Controlled Indoor Storage |
* NO acclimatization period is
required under normal (above +10 degree Celsius) delivery and proper installation conditions
... NO ten (10) to (14) fourteen day
'Waiting
Period' to re-condition the wood because we control final
product processing from "beginning-to-end" and without 'abusive handling
and storage' delays.
* Applies to JUT Mill
Readiness and 'local' hand-delivery in above-zero degree temperatures.
Extended distances and/ or Winter delivery conditions and/or commercial
transportation may affect Kiln-Pitch to a slight extent requiring minimal
(48 hr. room-temperature) acclimation.
|
|
Marreed-Prestman: Pineflooring.ca

|
Commodity-Oriented
'Resellers'
 |
Print this Page?
(Click on your PRINT icon.)
You
are here >
www.pineflooring.ca
> compare.
Next:
u
DIY: PRICING
|